Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Headgasket sealer?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 2691
Joined: Sun Sep 03, 2006 7:31 pm
Location: where ever the track takes me

Headgasket sealer?

Post by muddydigger »

Im putting the heads back on my Landrover Discovery v8.
I bought geniune head gaskets.
Do I need to put on any type of sealer , glue or goo of any type on the gaskets or just plain as they came?

Thanks
Digger.
For Kart racing information please visit our site at www.auskart.net
Top
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Contact:
Contact CRUSHU

Post by CRUSHU »

They can go on clean, or you can choose to use a VHT product called Coppercote, or any of the similar products.
I use coppercote on high comp motors, or ones that will see a blower or nitrous.
It isn't nessesary though, on anything near standard, unless they have head gasket issues.
www.CVEPerformance.com

Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

I always use hylomar. Its available at most auto shops and you just spray it on. I use this on almost any gaskit.
Top
Posts: 1048
Joined: Sat Jul 17, 2004 9:48 am
Location: Waikerie; SA

Post by Eddy »

yup ... Hylomar :cool:

just spray'er on. any over spray in the cylinder doesn't matter, will burn away in first combustion stroke.
Top
Posts: 1152
Joined: Mon Sep 25, 2006 8:25 pm
Location: the most livable planet in the universe

Post by its aford not a nissan »

X 3 seals good
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

I use hylomar too. Not cheap but lervely stuff.
This is not legal advice.
Top
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Re: Headgasket sealer?

Post by Ruffy »

muddydigger wrote:Im putting the heads back on my Landrover Discovery v8.
I bought geniune head gaskets.
Do I need to put on any type of sealer , glue or goo of any type on the gaskets or just plain as they came?

Thanks
Digger.
If it needs glue or goo then there's an underlying issue!

17 years in the trade and never used goo, never needed goo!
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Top
Posts: 4990
Joined: Sun Oct 20, 2002 7:22 pm
Location: Qld, Hilux Country

Contact:
Contact bubs

Post by bubs »

RUFF wrote:I always use hylomar. Its available at most auto shops and you just spray it on. I use this on almost any gaskit.
yeap this is good stuff, right aza
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!

Custom Parts & Fabrication!
Ph: 0417 708 598
Top
Posts: 780
Joined: Wed Apr 26, 2006 7:11 pm
Location: darwin again

Post by simkell »

sense a trend hylomar. $15 a can from memory
MUD, MUD, GLORIOUS MUD!
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

simkell wrote:sense a trend hylomar. $15 a can from memory
I know lots of workshops that wont fit a single gaskit without it. Its good insurance.

Dont get me wrong. Coppercoat as CRUSHU posted is also a perfect alternative. And possibly better in some aplications such as Copper Headgaskits used in Turbo and Blown engines.
Top
Posts: 918
Joined: Fri Jul 22, 2005 12:49 pm
Location: canberra

Post by 460cixy »

copper spray or hylomar. i assume your useing the thin stainless gaskets?
range rover & series one landy!
Top
Posts: 2691
Joined: Sun Sep 03, 2006 7:31 pm
Location: where ever the track takes me

Post by muddydigger »

460cixy wrote:copper spray or hylomar. i assume your useing the thin stainless gaskets?
NO standard composit gaskets.
Thanks for the replys. There isnt anything wrong with the heads they were just cleaned up. I dont need to use any goo just wondering if it was neccessary.
For Kart racing information please visit our site at www.auskart.net
Top
Posts: 845
Joined: Sun Dec 17, 2006 8:28 pm
Location: Bairnsdale, East Gippsland

Post by jet-6 »

Coppercoat worked well, my old Mazda used to have stuff all clearance between no1 and no2 cylinders, without the coat it would blow in no time
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 97 guests