Outer Limits 4x4 Board

Hey all, this is a few pics of the old girl after i ran up the arse of new tarago... basically the cullbar got torn off on the passenger side of her, it was a steel bar and got riped like a piece of paper So basically the bar mount on the chassie is bent on the pass side, here are some pics, and just wondering if it will be just a matter of heating it up and bending it back? All thoughts would be greatly appr.







Thanks guys!

Didn't you roll this recently ?

just wondering if it will be just a matter of heating it up and bending it back? All thoughts would be greatly appr

.

to fix the bit that you can see its all good bit of heat and a bash n away you go.... is the rest of the chassis still square though? will your diff's still run square to each other etc etc?

hiluxes have rather piss weak chassis. id recomend taking it to a panel beater even and getting a quote. they picked up shite on my car when some wench ran up my ass that i couldnt see till days later.

Heya, yeh was recently a roll, and my luck just gotten worse, this is like the new truck with all my gear in it bar the 3 litre diesel.. just the sluggish 2.8 now. Um yeh pretty sure everything is sweet. just needs a wheel allignment aye, got the rod off and adjusted it so its ok, still needs it but. K K so a panelbeater and a quote, or heat up and away i go. hmm oh n my best mate, was at morayfield in his green extracab, and got cleaned up through an intersection, cars rorted, everthing is bent. diffs everything. So theres another to my groups name. Dead set. Bullshit is all i can say Thanks blokes ill let you no how the quote goes. Anyone in my area thats good p beater? Cheers