Page 1 of 1
recesed tie downs
Posted: Wed May 23, 2007 5:15 pm
by vanbox
does anyone know where i can get recesed tie down points for the tray? basically cut out a section of the bed and mount them in the hole.
pics would be great.
cheers
PAUL
Posted: Wed May 23, 2007 5:55 pm
by shrekman
Try any of the Truck and trailer spare joints. What part of the country you wheelin in?
Posted: Wed May 23, 2007 7:09 pm
by CWBYUP
we sell them at work $15- for the 2 tonne rated ones with a bolt hole in each corner.
Can also freight them cheap if need be.
/ shameless plug over.
Nick
Posted: Wed May 23, 2007 9:39 pm
by A1
We buy them from Ovesco google them for addys around OZ .....or like said above try a truck parts place ..etc
Posted: Wed May 23, 2007 11:11 pm
by Hoppy11
I used flush tie downs on my tool boxes,also double as handles $15.00 ea from a marine parts shop
Posted: Thu May 24, 2007 6:46 am
by vanbox
im from the sunny coast in qld.
hoppy11 they are the type of thing im after.
cwbyup, do u have a pic of what you sell or is it similar/same to hoppy11.
thanks everyone.
PAUL
Posted: Thu May 24, 2007 7:10 am
by 80lsy gq
$9 from any nut and bolt shop
or from trailer parts places
dave
Posted: Thu May 24, 2007 9:07 am
by CWBYUP
They look the same as hoppys.
You can buy cheap ones without the springs but they rattle and Piss you off very quickly.
Ours have the springs and look the same as hoppy11's.
Cheers Nick
Posted: Thu May 24, 2007 11:43 pm
by Hoppy11
CWBYUP wrote:They look the same as hoppys.
You can buy cheap ones without the springs but they rattle and Piss you off very quickly.
Ours have the springs and look the same as hoppy11's.
Cheers Nick
Yea mine have the springs, no rattle
Hoppy
Posted: Sat May 26, 2007 11:09 am
by Kev80
vanbox wrote:im from the sunny coast in qld.
Why not put that in your profile to save people asking ?