Outer Limits 4x4 Board

Is there anyone who builds custom fourby's in QLD (Brisbane area) for example: OverKill, Dobbin, ABT M&M etc....

Get on to Brett at On Track...66 Moss St Slacks Creek...they have built some awesome comp vehicles as well as custom daily drivers and would be one of the best cab cut shops in the country.

PM Brooksey.... i dunno if that's the right name as i am really drunk after watching th game......

He;s the best in QLD

Personal exsperience with On Track is i wont touch any thing they mod. i got my sills and rear quarter cut and it went back three time as the paint cracked. to worsen it it's still the same if not worse. and to add iceing to the cake they just put a shitload of bog in the sills and 12 months after it started falling out. also got them to fix some dents in the rear quarter and they have cracked. this is only my dealings with them and i would still get parts etc but if they still have the same panel beater (bogger) dont touch them. Everyone thats seen it cant believe it either.

Thanks guys I'll look into it and thanks for the heads up micks troll regarding the panel beating, I'm more interested in 4 links and suspension mods more than panel work... Thanks again!

try mark from suziworx on the sunshine coast..


he can do anything and is really well priced..

hehe own plug...

mud4b wrote:try mark from suziworx on the sunshine coast..


he can do anything and is really well priced..

hehe own plug...

PM sent....

or try bubs off this forum - i can personally recomend his work, does top work. Check his own members threads and build up threads on other members trucks.

benhl wrote:or try bubs off this forum - i can personally recomend his work, does top work. Check his own members threads and build up threads on other members trucks.

x 2

If it is custom stuff you want made on southside then PM him.

x 3


http://www.outerlimits4x4.com/viewtopic.php?t=95576

Thanks guys, he does unreal work aswell - I looked at the mogota link.

Good to know theres some good custom 4x4 builders around......

try superior engineering they do some go work and have good custom parts

http://www.superiorengineering.com.au/

mud4b wrote:try mark from suziworx on the sunshine coast..


he can do anything and is really well priced..

x2

See my moon buggy thread in the members section
http://www.outerlimits4x4.com/viewtopic ... highlight=






















Plus I have to say this or he will fill my buggy with fish sticks

I can tell you one i wouldn't touch again...

Brewskibilt, Chris deBrueys....

Work quality is good, it's just time is an unknown factor to him, as is customer service....

Not running Tough Tracks this weekend due to his attitude and lack of interest in fixing my cage in a timely fashion...

Spock

Shorty40 wrote:

mud4b wrote:try mark from suziworx on the sunshine coast..


he can do anything and is really well priced..

x2

See my moon buggy thread in the members section
http://www.outerlimits4x4.com/viewtopic ... highlight=






















Plus I have to say this or he will fill my buggy with fish sticks

haha fish sticks...
as for bubs, he does awsome work but i cant recommend him as he is kicking my ass jobs wise... bwahahahahahahha bubs...


ps jokes man...

The biggest issue you have with most fab shops in Brisbane is that Custom Fabrication is not their Bread and Butter. So the custom work takes a back seat to the work that keeps their doors open. This is the most common reason for shops to take so long to do this custom work which also gives some of them an undeserved bad name amongst the Custom 4WD scene.

There just isnt enough guys in Brisbane willing to throw the Coin at getting someone else to build their rigs for many to make a living out of Custom Fabrication.

Maybe we are all poorer here in Brisbane or maybe we have more ability then guys down south so we do the work our selves?

But there are defianatly guys around here that should never attemp building a garden shed let alone a Custom 4WD but still attempt it. (not directed to anyone mentioned or involved in this thread )

Mad Cruiser wrote:PM Brooksey.... i dunno if that's the right name as i am really drunk after watching th game......

He;s the best in QLD

Yeah, Brook does amazing work!! Heres some links to some of his work

http://www.outerlimits4x4.com/viewtopic.php?t=90380

http://www.outerlimits4x4.com/viewtopic.php?t=88045

His contact details.

Custom 4x4 Fabrications
"All 4x4 custom fabrication & components"
ph: (07) 4194 1144 mob: 0400 443 802
custom4x4fabrications@westnet.com.au

I'd say either way Brooksey or Mud4B do exceptional looking work, so I'll be able to pick either way! Thanks everyone for your recommendations.

RUFF wrote:The biggest issue you have with most fab shops in Brisbane is that Custom Fabrication is not their Bread and Butter. So the custom work takes a back seat to the work that keeps their doors open. This is the most common reason for shops to take so long to do this custom work which also gives some of them an undeserved bad name amongst the Custom 4WD scene.

There just isnt enough guys in Brisbane willing to throw the Coin at getting someone else to build their rigs for many to make a living out of Custom Fabrication.

Maybe we are all poorer here in Brisbane or maybe we have more ability then guys down south so we do the work our selves?

But there are defianatly guys around here that should never attemp building a garden shed let alone a Custom 4WD but still attempt it. (not directed to anyone mentioned or involved in this thread )

this is where im at right now, all i do is custom work now, not enough of it for sure, not enough to live on either.. hence while soonish ill have to get a p/t job...as i do not believe in the dole..

mud4b wrote:

RUFF wrote:The biggest issue you have with most fab shops in Brisbane is that Custom Fabrication is not their Bread and Butter. So the custom work takes a back seat to the work that keeps their doors open. This is the most common reason for shops to take so long to do this custom work which also gives some of them an undeserved bad name amongst the Custom 4WD scene.

There just isnt enough guys in Brisbane willing to throw the Coin at getting someone else to build their rigs for many to make a living out of Custom Fabrication.

Maybe we are all poorer here in Brisbane or maybe we have more ability then guys down south so we do the work our selves?

But there are defianatly guys around here that should never attemp building a garden shed let alone a Custom 4WD but still attempt it. (not directed to anyone mentioned or involved in this thread )

this is where im at right now, all i do is custom work now, not enough of it for sure, not enough to live on either.. hence while soonish ill have to get a p/t job...as i do not believe in the dole..

Sounds like you need to charge more or sell more bolt on stuff to go with the custom bits.

sierrajim wrote:

mud4b wrote:

RUFF wrote:The biggest issue you have with most fab shops in Brisbane is that Custom Fabrication is not their Bread and Butter. So the custom work takes a back seat to the work that keeps their doors open. This is the most common reason for shops to take so long to do this custom work which also gives some of them an undeserved bad name amongst the Custom 4WD scene.

There just isnt enough guys in Brisbane willing to throw the Coin at getting someone else to build their rigs for many to make a living out of Custom Fabrication.

Maybe we are all poorer here in Brisbane or maybe we have more ability then guys down south so we do the work our selves?

But there are defianatly guys around here that should never attemp building a garden shed let alone a Custom 4WD but still attempt it. (not directed to anyone mentioned or involved in this thread )

this is where im at right now, all i do is custom work now, not enough of it for sure, not enough to live on either.. hence while soonish ill have to get a p/t job...as i do not believe in the dole..

Sounds like you need to charge more or sell more bolt on stuff to go with the custom bits.

tried that too, i have accsess to nearly every part that can go onto a 4by, there just is no call for it here on the sunshine coast.

i do not want to charge any more than what i am now, otherwise me looking for a part time job will turn into me looking for a fulltime job.. and the full closure of suziworx..

sounds like you need to adapt your marketing to include the soccermums

chikoroll_ wrote:sounds like you need to adapt your marketing to include the soccermums

Soccer mums in buggies

they'll be unique, and thus the envy of the other soccermums, just gotta make sure that it handles like a sedan, and has alot of shopping room, oh and be sure to advertise about the shopping room as "many storage spaces"

Yeh I have to give a plug to Brooksy. I couldn't be happier with the quality of work and the service. I will be seeing him for any other work and have no hestitation recommending him.

Custom 4wd Creations Brisbane
0438279890

also theres
2DEXTREME

i havn't used them but just putting others out there

2DEXTREME does very good quality work, does the niceest exo's i've seen aswell as drop arms, hd steer and trail arms and all sliders and bull bars n bumpers