Page 1 of 1
air locker safe pressure
Posted: Sat May 26, 2007 6:51 pm
by beavis
okay, if i was to run a generic compressor to difflocks via a tank, what would be a safe pressure to activate the locks?Have seen those 100psi arb switches on ebay for $20, is that the operating pressure.
Posted: Sat May 26, 2007 6:57 pm
by Tiny
the standard range is 70psi to 110psi
Posted: Sat May 26, 2007 7:02 pm
by beavis
Thanks, the other option i want to pursue is regulating the pressure to the locks, and running the compressor to full capacity via a storage tank.
Posted: Sat May 26, 2007 9:43 pm
by nastytroll
easy done aswell
Posted: Sun May 27, 2007 4:38 pm
by nzdarin
90psi is max reconmended pressure. I have a Typhoon compressor feeding a 20l tank with a pressure switch cycling the compressor at 80 to 110psi. I have a non return to the compressor and the locker outlet is regulated to 90psi. Is alot simpler than it sounds
Posted: Sun May 27, 2007 7:22 pm
by Shadow
you can get regulators from supercheap for $12. Dunno how good they are though.