Outer Limits 4x4 Board

I am researching the drivetrain options for swapping an Isuzu 4JG2 diesel into a '99 Rodeo. From what I have read this motor had the AW30-40LE auto tranny behind it. What I am trying to find out is what the bolt pattern from the bellhousing to the tranny looks like. My goal is to bolt a Toyota A340F or Jeep AW4 tranny to the 3.1.

Any pictures or info is greatly appreciated.
Thanks
Rich

hi there you have an engine? i have one complete with 60ks auto as well complete running want $4500 can hear running in mini truck

Nope, no engine yet. I don't even have the rig to swap it into yet. I am just doing research to try and figure out some of the bugs before I get started. Thanks for the offer though.

Would you happen to know if I could bolt a Toyota A340F to the Isuzu bellhousing for the 3.1TD?

HI THERE I WAS TOLD IT THE SAME BOX AS CRESSIDA BY MY AUTO GUY WITH A TRANSFER CASE ON IT WHAT SORT OF RODEO ARE YOU LOOKING FOR ?

I would suspect they would bolt up but the shafts would have different spline counts and different lengths.

HEH YARNO HOWZ THAT MU IVE HEARD SO MUCH ABOUT ANY LATEST PICS CHEERS

RODEOMAN wrote:WHAT SORT OF RODEO ARE YOU LOOKING FOR ?

I am picking up a '99 Rodeo. It has a rod knock that I'm going to fix so that I can wheel it until I get the motor and stuff ready. Should be a fun swap.

RODEOMAN wrote:HI THERE I WAS TOLD IT THE SAME BOX AS CRESSIDA BY MY AUTO GUY WITH A TRANSFER CASE ON IT WHAT SORT OF RODEO ARE YOU LOOKING FOR ?

if thats true then the 5 speed supra box will fit it aswell, and if the 5 speed supra box fits it then does that mean that the cressida engine will fit the isuzu mu 5 speed gearbox?, cause if it does the it may be possible to put a lexus v8 in with an adaptor plate which are more common, lexus v8-supra w58 box. means lexus v8 - w58 adaptor - isuzu mu gearbox.... or better yet a 1jz-gte