Page 1 of 1
81 FJ60 landcruiser ankrige point for capsule
Posted: Sun May 27, 2007 11:52 pm
by Nat84
hi guys, i have just acquired a 81 FJ60 and need to put a baby capsule in to it but can't find a ankrige point for it.
can someone shed some light on what i need to do to put one in
nat
Posted: Mon May 28, 2007 7:02 am
by RC_Freak
you need to have a crab bar fitted.
Matt.
Posted: Mon May 28, 2007 11:30 am
by Shadow
RC_Freak wrote:you need to have a crab bar fitted.
Matt.
my 60 has 4 tie-down points in the cargo area, 2 close to the rear seats. These would surely be able to be convertted to a capsule anchorage point.
I would still be getting a proffesional to do it though.
Posted: Mon May 28, 2007 12:12 pm
by Nat84
Shadow wrote:RC_Freak wrote:you need to have a crab bar fitted.
Matt.
my 60 has 4 tie-down points in the cargo area, 2 close to the rear seats. These would surely be able to be convertted to a capsule anchorage point.
I would still be getting a proffesional to do it though.
oh for sure, but was just asking as i didn't find any
my 60 has 4 tie-down points in the cargo area, 2 close to the rear seats. These would surely be able to be convertted to a capsule
anchorage point.
so that is how you spell it
Posted: Tue May 29, 2007 9:41 pm
by mr304
in the back of my sixty on the back of the rear seat there is a mount for a baby seat there is three you my seat had carpet on the back off it so i had to search for it but was in the middle and there are three of them for each seat position if you know what i mean
Posted: Tue May 29, 2007 10:46 pm
by Nat84
mr304 wrote:in the back of my sixty on the back of the rear seat there is a mount for a baby seat there is three you my seat had carpet on the back off it so i had to search for it but was in the middle and there are three of them for each seat position if you know what i mean
yep i know what you mean that is the same as the old mans 60 (FJ62) but may one i can't find one (FJ60)
Posted: Fri Jun 01, 2007 8:55 pm
by mr304
strange they must of changed it in some models
Posted: Sat Jun 02, 2007 7:07 pm
by RC_Freak
Just make sure that what ever you do mounting point wise, that you get it checked out by a qualified fitter.
after all it will be holding your most valuable cargo.
Matt.
Capsule
Posted: Wed Jun 06, 2007 9:58 pm
by Cruza62
A mate has a bar across the back of his 60 that is made for bracing a capsule. It simply sits just in front of and b/w the very back two windows...its just a peice of pipe...
Re: Capsule
Posted: Wed Jun 06, 2007 10:39 pm
by bj42turbo
Cruza62 wrote:A mate has a bar across the back of his 60 that is made for bracing a capsule. It simply sits just in front of and b/w the very back two windows...its just a peice of pipe...
i had one fitted in my 40 but since sold it. but there is one on Ebay at the moment in a Jackaroo but bear in mind they are adjustable
http://cgi.ebay.com.au/Holden-Jackaroo- ... dZViewItem