Page 1 of 1
2001 holden jackaroo LWB wagon body lift
Posted: Mon May 28, 2007 7:01 pm
by 84mksd33t
wat do i need to know about doing a 2" body lift on the subjected vehicle?
i have done lots of patrols etc but tehy did not have airbags.
is there anything specific i need to know?
Posted: Mon May 28, 2007 10:33 pm
by dogoff
You have to Keep the bullbar in the same spot if it has one
Posted: Mon Jul 30, 2007 9:13 am
by corndale1
I did a 2inch body lift on my 90 model LWB Jackaroo, very easy. No modifations except that I did lower my radiator to keep it in line with where it used to sit. steering didn't need any work but I did have to bend my auto linkages a bit to get them to line up. Fuel filler will give you no problems. Took me less than one days work and I ain't particually mechanicly minded. I had a local metal fabricator here in Brisvagas make me new bullbar mounts to lift it inline with new body height. GOOD LUCK.