Page 1 of 1
Indicator fluid
Posted: Sun Dec 14, 2003 5:19 pm
by mickrangie
My indicator fluid is low and they no longer flash....
Do I have to use Land Rover ‘flasher can’ to get them going again or is there another brand that will do the job?
BTW it’s a 93’
Mick
Indicator fluid
Posted: Sun Dec 14, 2003 5:23 pm
by LowRanger
I would just use a bottle of FLASH LUBE
Posted: Sun Dec 14, 2003 6:08 pm
by bazzle
I use plain old blinker fluid but suprisingly enough, you can use
one of those 'personal' lubricants like
Astroglide or KY since they have
what it takes to stand up to the intense
heat and pressure found in a tight
flasher.
Bazzle
Posted: Sun Dec 14, 2003 6:43 pm
by rick130
I
always use a
fully synthetic blinker fluid as you can significantly extend the drain interval, and you get far less evaporation at elevated temperatures around the high temperature filament/ glass interface, again extending the life of the fluid.
Posted: Sun Dec 14, 2003 7:09 pm
by mickrangie
OK jokes aside does it rquire a LR type relay flasher can?
Posted: Sun Dec 14, 2003 7:48 pm
by bazzle
NO, you can use a generic flasher if you hold it in with OEM duct tape.
Bazzle
Posted: Sun Dec 14, 2003 8:27 pm
by mickrangie
sweet fanks mate..
Does anyone know where the filler cap for the rhr indercator is?
