Outer Limits 4x4 Board

I am trying to figure out if this with PS box is to suit a left ro right hand drive vehicle ...

Its quite cheap but the seller does not seem to know\care

looks to be a RHD one as it bolts onto the left chassis rail and pitmarn is backwards pointing.

Yep, that's a RHD box.

Steve.

That is what I thought ... but then begin to doubt as it is being sold in Aus ..

well now my Zuks gonna have PS as well ...
$65 for a vit power steering box and I have a pump I purchased ages ago of Antt I think ..

I am getting sift in my old age next up I will be installing an auto and a nodding dog ..

$65? Is that really cheap? What should I be paying? I just rang a wrecker and he quoted me $175 for the box and lines.

I've got an old holden pump of a 3.6 V6. Whats the chances of modding that to fit? The guy quoted $440 for the box pump and lines. I wouldn't mind getting out of it cheaper.

Sorry for the hijack love_mud....

ZookStock wrote:

love_mud wrote:well now my Zuks gonna have PS as well ...
$65 for a vit power steering box and I have a pump I purchased ages ago of Antt I think ..

I am getting sift in my old age next up I will be installing an auto and a nodding dog ..

Is this going on a vitara or a sierra?

If it's on a sierra........
It can be put on the easy way or the harder way. I've seen two rag joints used to soak up the angle in the steering rod (vitara chassis curves, sierra one doesn't). Or Do What I did and make up a wedge and redrill and crush tube it.

Sierra ..
I will get a wegdge made up. I will be using the small uni joints to hook the sierra collum to the vit box.

love_mud wrote:

ZookStock wrote:

love_mud wrote:well now my Zuks gonna have PS as well ...
$65 for a vit power steering box and I have a pump I purchased ages ago of Antt I think ..

I am getting sift in my old age next up I will be installing an auto and a nodding dog ..

Is this going on a vitara or a sierra?

If it's on a sierra........
It can be put on the easy way or the harder way. I've seen two rag joints used to soak up the angle in the steering rod (vitara chassis curves, sierra one doesn't). Or Do What I did and make up a wedge and redrill and crush tube it.

Sierra ..
I will get a wegdge made up. I will be using the small uni joints to hook the sierra collum to the vit box.

Is it possible to get a couple made up?? PM if u want

Cheers

Nic

nicbeer wrote:

love_mud wrote:

ZookStock wrote:

love_mud wrote:well now my Zuks gonna have PS as well ...
$65 for a vit power steering box and I have a pump I purchased ages ago of Antt I think ..

I am getting sift in my old age next up I will be installing an auto and a nodding dog ..

Is this going on a vitara or a sierra?

If it's on a sierra........
It can be put on the easy way or the harder way. I've seen two rag joints used to soak up the angle in the steering rod (vitara chassis curves, sierra one doesn't). Or Do What I did and make up a wedge and redrill and crush tube it.

Sierra ..
I will get a wegdge made up. I will be using the small uni joints to hook the sierra collum to the vit box.

Is it possible to get a couple made up?? PM if u want

Cheers

Nic

No worries .. i will get some prices ..

anyone else want one ?

I have a square adapter at home if u need measurements also.

Bascially bolts onto factory spot and uses combo of studs from plate and bolts through.

Nic

future use i would be up for a wedge

nicbeer wrote:I have a square adapter at home if u need measurements also.

Bascially bolts onto factory spot and uses combo of studs from plate and bolts through.

Nic

If you could post em up that would be great ...

I will have to see if I can dig up the post from a few months back that had a picture of the actual wedge.,