Outer Limits 4x4 Board

Hi guys

need some info. im after some egine mounts.

probaly lhs rhs and the trans mounts.

i need to know where to buy and a averge cost you guys have paid.

CHeers thanks again.

vicelore wrote:Hi guys

need some info. im after some egine mounts.

probaly lhs rhs and the trans mounts.

i need to know where to buy and a averge cost you guys have paid.

CHeers thanks again.

Its normally only the side passanger engine mounting rubber that fails.

From memory Viclore had a roll that poped the mounts apart.

Layto....

Oh .. apparently engine mount for one of the chrysler vehicles are a direct bolt in I am trying to hunt down which motor/vehicle they are from ..

They are normally used to tie a 5.2 litre motor to the chassis .. so an 1.3 or 1.6 should be no real biggie

love_mud wrote:Oh .. apparently engine mount for one of the chrysler vehicles are a direct bolt in I am trying to hunt down which motor/vehicle they are from ..

They are normally used to tie a 5.2 litre motor to the chassis .. so an 1.3 or 1.6 should be no real biggie

5.2L = 318ci - Fireball oh yeah!!
Valiant wagons and sedans maybe Guy?

Layto....

lay80n wrote:

love_mud wrote:Oh .. apparently engine mount for one of the chrysler vehicles are a direct bolt in I am trying to hunt down which motor/vehicle they are from ..

They are normally used to tie a 5.2 litre motor to the chassis .. so an 1.3 or 1.6 should be no real biggie

5.2L = 318ci - Fireball oh yeah!!
Valiant wagons and sedans maybe Guy?

Layto....

From memory it was something like that .. if anyone elese used to subscribe to the old "topica" Zuk list it was origionally posted up by crow horse.

With a little searching I have found that roadless gear sell em as "forever motor mounts" http://www.roadlessgear.com/page/RGL/PROD/E/RG241
but does not say what they are actually for ... it is driving me crazy now trying to remember .... I know that it was for a 318 though

love_mud wrote:the old "topica" Zuk list it was origionally posted up by crow horse.

Now there is a name I havn't heard in a long time.

I read a thread somewhere on the net recenlty about the 318 mounts. What I read possible on pirate4x4 was they are offset to help with driver side mount with 1600 conversion. It was late at night though


the old "topica" Zuk list it was origionally posted up by crow horse
What was this?
Nik

Yep just did a quick search on zuwharrie and YES the mounts are offset and are used to lower the motor.
Not sure where to buy them but I spose you could go to your local parts place and ask to look at there book. Tell them what you are after they should be able to help. Ive nearly talked myself into doing this
Nik

vicelore wrote:Hi guys

need some info. im after some egine mounts.

probaly lhs rhs and the trans mounts.

i need to know where to buy and a averge cost you guys have paid.

CHeers thanks again.

I can get Sierra replacement mounts for $23.00e. Hope that gives a guide to your question!

Podge wrote:

vicelore wrote:Hi guys

need some info. im after some egine mounts.

probaly lhs rhs and the trans mounts.

i need to know where to buy and a averge cost you guys have paid.

CHeers thanks again.

I can get Sierra replacement mounts for $23.00e. Hope that gives a guide to your question!

And finally someone answers the actual question

here you go.
All the info needed
http://bbs.zuwharrie.com/content/topic,60431.0.html

thanks for the replys guys. on my way home last night stoped by auto barn. they said they could get them in for me overngiht. all 3 mounts where 31$ each or seomthing. a little more than 23$ podge but oh well.

Cheers guys