Page 1 of 1
285's/33's on a 60 with no lift?
Posted: Mon Jun 04, 2007 7:37 pm
by known 2
can it be done with minimal scrubing.
or stick to 32's
285s
Posted: Mon Jun 04, 2007 7:48 pm
by 75 cruser
285s are the same size as a 35 i would think you would need a lift
rob
Posted: Mon Jun 04, 2007 8:12 pm
by Sixty's Guy
I ran 33x10.5x15 BFG MT's on 15x7 wheels with no lift in the front and 2" lift in the rear. No problems at all.
Posted: Tue Jun 05, 2007 10:16 am
by fj60efi_
285's are a true 33" - slightly bigger than a 33x12.5R15 but also narrower.
I ran 315/75R16's (35") on mine without any body lift but required a fair bit of panel cutting/beating and a little extra offset.
Re: 285s
Posted: Tue Jun 05, 2007 11:20 am
by Guy
75 cruser wrote:285s are the same size as a 35 i would think you would need a lift
rob
The 285 by itslef tells you very little ..
a 285/75/16 is close to a 33
a 285/85/16 is close to a 35
etc etc ...
Posted: Tue Jun 05, 2007 4:46 pm
by known 2
285/75 sorry.
i've never seen a 285/58
Posted: Tue Jun 05, 2007 5:34 pm
by joel HJ60
I ran 33x12.5 Cooper ST's. No lift, no worries.