Page 1 of 1
suspension problems
Posted: Tue Dec 16, 2003 2:34 pm
by bella
have got a coily with bundera diffs and control arms, 35s etc,it has zero flex are the toyota bushes to stiff and binding?uses same 2 inch springs and shocks as before but it used to cross up fine with the standard axles and control arms
Posted: Tue Dec 16, 2003 2:37 pm
by Damo
Prolly need to see some pics of it to be of any help to ya.
Posted: Tue Dec 16, 2003 2:44 pm
by greg
Damo wrote:Prolly need to see some pics of it to be of any help to ya.
I think just hearing what is under this truck we will want to see pics regardless of whether or not we will be helping
Posted: Tue Dec 16, 2003 2:45 pm
by Damo
greg wrote:Damo wrote:Prolly need to see some pics of it to be of any help to ya.
I think just hearing what is under this truck we will want to see pics regardless of whether or not we will be helping
Shhhhhhhhhh, we wont get to see pics if we dont look like we wanna help out
Posted: Tue Dec 16, 2003 2:50 pm
by mud4b
i was thinking the same......
BRING ON THE PICS!!!!!!!!!
Posted: Tue Dec 16, 2003 2:50 pm
by greg
This may be a silly idea, but why not remove the bushings and cross the car up - see if that improves the flex - then you will know that it is the bushings that you need to do something about right.
Note: obviously you shouldn't be driving it very far or fast with no bushings to be sensible about it.
Posted: Tue Dec 16, 2003 2:57 pm
by mud4b
PICS!
Posted: Wed Dec 17, 2003 2:34 pm
by bella
pics once i sort scanner out
Posted: Wed Dec 17, 2003 2:42 pm
by mud4b
on with it.......
Posted: Wed Dec 17, 2003 3:13 pm
by skippy