Page 1 of 1
Cams approved rollcages
Posted: Tue Dec 16, 2003 4:47 pm
by AndrewT
Does anyone on this board have a copy of the 2000 CAMS manual or know the specifics of whats required to comply with building a cage for winch challenge type comps- i.e pipe wall thickness seamless or not etc
Everyone I talk to seem pretty vaig.
Re: Cams approved rollcages
Posted: Tue Dec 16, 2003 4:49 pm
by bogged
AWILL4x4 will know it, he makes them, he made the cage for that V12 thing that races cars, that yank thing...
nothign on
www.cams.com.au ??
Posted: Tue Dec 16, 2003 4:52 pm
by spazbot
talk to Awill4x4 on this board, he will be able to build you a cams approved cage (thats if you are in melbs)
Posted: Tue Dec 16, 2003 5:11 pm
by Area54
Try Pete at Gondwanaracing if you are in Brisbane:
http://Gondwanaracing.com.au
Posted: Tue Dec 16, 2003 7:32 pm
by MissDrew
Or cheezy
Posted: Wed Dec 17, 2003 9:07 am
by grimbo
Do you need a CAMS approved to enter or is it just a suggestion as i thought to have a CAMS approved rollcage as a requirement for the event requires all drivers to be CAMS approved, the event to be CAMS approved which is a major headache. You will also fid that CAMS approved for is for high speed rollovers/accidents not 4wheeling which is usually of a less violent nature.
Posted: Wed Dec 17, 2003 9:22 am
by greg
I know this isn't CAMS stuff, but if you want to read up about what the roadworthy requirements for a roll cage are (in Vic) you can find them here:
http://www.vicroads.vic.gov.au/vrne/vrn ... ment&Area=[Road+safety+hidden+documents]