Outer Limits 4x4 Board

hi guys just want to know want a 60 series PTO winch will fit to apart from a 60,61,62

like will it fit 40,45,70,75 ect

nat

Nat84 wrote:hi guys just want to know want a 60 series PTO winch will fit to apart from a 60,61,62

like will it fit 40,45,70,75 ect

nat

The PTO output will fit any 5 speed with the split transfer IIRC. The winch will fit anything, and the drifeshafts will be different between 40/60/70.

-Stu

dogbreath_48 wrote:

Nat84 wrote:hi guys just want to know want a 60 series PTO winch will fit to apart from a 60,61,62

like will it fit 40,45,70,75 ect

nat

The PTO output will fit any 5 speed with the split transfer IIRC. The winch will fit anything, and the drifeshafts will be different between 40/60/70.

-Stu

so it want fit a 4speed?
what is a split transfer IIRC?
how different are the driveshafts between 40/60/70.?

Nat84 wrote:

dogbreath_48 wrote:

Nat84 wrote:hi guys just want to know want a 60 series PTO winch will fit to apart from a 60,61,62

like will it fit 40,45,70,75 ect

nat

The PTO output will fit any 5 speed with the split transfer IIRC. The winch will fit anything, and the drifeshafts will be different between 40/60/70.

-Stu

so it want fit a 4speed?
what is a split transfer IIRC?
how different are the driveshafts between 40/60/70.?

IIRC - If I Recall Correctly

I'm not sure which transfer case the 4-speeds use - they may well be the same.

As far as i know the 60 series used a two piece driveshaft, wheras the 40 used a three piece. I'm not sure on the 70 but from what i can tell it would need a three piece too.

-Stu

if the pto winch comes with a bracket/brace measure it to make sure it'll fit between your chassis rails..

a mate got one for his 60 off a 60 (so he was told) and found the winch and his chassis rails didnt line up..