Page 1 of 1

Different adju panhard question...

Posted: Sun Jun 10, 2007 8:49 am
by Hof
Hiya,

Basically, I need adjustable panhards for a GQ and the front needs to have the mount for the steering damper, I know some come with a bracket that bolts to the panhard, my questions is..

I am wondering if you can get adjustables with this bracket welded on, ie a permanent one??

Anyone help out??

Cheers,

Hof

.

Posted: Sun Jun 10, 2007 9:23 am
by JBE
Hi

I have the Megalift adjustable panhard rod (snake racing) that has the bracked welded on. However, my RTC damper tore it off which is not too unusual as I was told. Go for the olt on bracket as they are stronger and easier to adjust.

That's my five cents.

Cheers
Joachim

Posted: Sun Jun 10, 2007 9:23 am
by rvh96
snake racings panhards have the damper bracket on them

Posted: Sun Jun 10, 2007 2:00 pm
by badger
many companys sell the panhards with brackets welded on but the bolt on ones are fine if set up right, and also have the benefit of adjustability for different lifts and the difference between the small n big bolt steering boxes pitman arm
the reason it tore off was because of the rtc.
they are absolute crap and put excessive load on all the steering componants. They are only used to mask steering problems wich would be better fixed.
if you to run a normal steeing dampner it would not have broken:P