besides taking it to a joint to do, id rather go to kmart and grab some stuff.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
MK radiator clean, how to?
MK radiator clean, how to?
Hi, whats the best way to go about giving my radiator a nice clean (on the inside).
besides taking it to a joint to do, id rather go to kmart and grab some stuff.
besides taking it to a joint to do, id rather go to kmart and grab some stuff.
85 MK lwb 3.3td 2 inch body lift, 32inch simex Ironman 2 inch suspension lift. 4 tonne on the clock, original donk.
soloution wont do a hell of alot, will do a little better than water and if you use one with an alkaline base will help prevent electrolysis in your engines cooling system, but still wont do much for a blocked radiator.
If you have access to an air compresor you can buy a back flush dildo tool from repco or cov's wich conects to the hose and the air supply and flushes the radiator and eng block in reverse with pressure, gennerally they do a great job, but i find it eaier to just remove the radiator and send it out
If you have access to an air compresor you can buy a back flush dildo tool from repco or cov's wich conects to the hose and the air supply and flushes the radiator and eng block in reverse with pressure, gennerally they do a great job, but i find it eaier to just remove the radiator and send it out
Who is online
Users browsing this forum: No registered users and 2 guests