feroza standard height?????
Posted: Fri Jun 15, 2007 10:42 pm
hey i just brought a 92 roza it looks lifted a bit so could you tell me what the standard height is??
thanks
thanks
Outer Limits 4x4 Board
Aussie Hardcore Wheelers
https://outerlimits4x4.com.au/
feroza standard height?????
Page 1 of 1
Posted: Sat Jun 16, 2007 10:59 am
Download the "Service Manual" in the FAQ section and it gives measurements for the height of the front suspension.
Posted: Sat Jun 16, 2007 11:25 am
good one thanks mate.
Posted: Sat Jun 16, 2007 4:16 pm
Another way to tell is to check the front arms/ bumpstops - they should be sitting around 1/2 way between the stop blocks on the chassis. Also check the bump stops haven't been "cut down" on the front.
From memory the stock rear leaves on mine were 4 + 1 overload? Yours should be the same. They will most likely be sitting almost straight with no load and should have teflon / plastic spacers between the leafs at the ends (most aftermarket springs don't.)
From memory the stock rear leaves on mine were 4 + 1 overload? Yours should be the same. They will most likely be sitting almost straight with no load and should have teflon / plastic spacers between the leafs at the ends (most aftermarket springs don't.)