Outer Limits 4x4 Board

hey guys just wondering if anyone has any pics of wireing to a warn highmount to the batterys ??

i have a look in the bible an i couldnt find anything

Does this help?

kinda helps but i need to know what the wirein is like at the battery end as i dont under stand electrics to well

would it connect to one battery or both???

ausyota wrote:Does this help?

Helped me!

Do you have 12v with twin batteries or 24v. Are you running the winch on 12v or 24v. It all depends on how your batteries are wired up and controlled (if 12v)

atm i have 2 700 cca exide 12v batteries running through a pirana 180s dual battery kit

is that diagram for in cab winch control? that would be very helpful indeed.

i have a lowmount 10000pd winch would the wiring to the motor be the same?


PAUL

vanbox wrote:is that diagram for in cab winch control? that would be very helpful indeed.

i have a lowmount 10000pd winch would the wiring to the motor be the same?


PAUL

It is basicly the wiring diagram for the standard hand controller I think.
You can use it to work out what wires to use for in cab though.

so does anyone have any pics of how there wiering it set up for there winches

theres a pic of my dodgy wiering setup its pritty messy need to clean it up but im not finished with wiering yet



here are my terminals
http://www.jaycar.com.au/productView.as ... &SUBCATID=

anyone have pics of the wiering set up for a 24v system???

rusty_042 wrote:so does anyone have any pics of how there wiering it set up for there winches

theres a pic of my dodgy wiering setup its pritty messy need to clean it up but im not finished with wiering yet



here are my terminals
http://www.jaycar.com.au/productView.as ... &SUBCATID=

go the pom bus!

hey there is nothing wrong with it considering it is basicly being replaced by nissan holden an toyota parts lol

still looks like a pom bus tho