Page 1 of 1
different pinion flanges
Posted: Sun Jun 17, 2007 7:33 pm
by DR Frankenstine
I removed an LSD out of the rear a 1986 sahara 60 and bolted back in a front diff centre out of a std 1985 60 no problems. Today I put the LSD into the rear of my 1985 60 and the tailshaft wouldn't bolt up, I had to re-drill the holes in the flange. I thought all the cruiser diff centres were the same from the 40 series up to the 75 series. I guess I thought wrong.
Posted: Sun Jun 17, 2007 7:38 pm
by Z()LTAN
im pritty sure the pinion splines the same...
so you could have just put the old pinion flange back on...
Posted: Sun Jun 17, 2007 9:55 pm
by dow50r
right about that time, the 62 came out with the 3f/61 12ht, and toyota did away with the d.c front shaft by twisting the transfer down 7 degrees....and different flanges on diffs...they are all interchangeable thou...
Posted: Mon Jun 18, 2007 7:54 am
by bj on roids
yeah they changed pinion flanges with regular abandon, you can buy circular ones with 8 holes in them
pinion
Posted: Mon Jun 18, 2007 6:36 pm
by DR Frankenstine
dow50r wrote:right about that time, the 62 came out with the 3f/61 12ht, and toyota did away with the d.c front shaft by twisting the transfer down 7 degrees....and different flanges on diffs...they are all interchangeable thou...
Ok.. Mine has the d.c front shaft the sahara didn't and the donor front diff didn't either.