Ive searched, not found much recent info
what sorta cost am i looking at to get an old 60 spoa and possobly engineerd on 35's 33's would be min size i want.
is this still possible in vic?
Cheers
Tim
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
60 series SPOA
Moderators: toaddog, Elmo, DUDELUX
60 series SPOA
It's simple: questions are inherently good. Your questions... not so much
2003 GUIII turbo intercooled 4.2 DX
2003 GUIII turbo intercooled 4.2 DX
Ring an engineer and ask them. It's the only way to know for sure.
Check out this thread with lots of engineers list (call the number ABOVE the names, not below)
http://www.outerlimits4x4.com/viewtopic ... t=engineer
I spoke to an engineer last week about engineering my hilux (in Vic) and he said 6 inches total lift is the limit. That includes suspension, tyres, bodylift. Last time I checked an SPOA alone is approximately 6" of lift on it's own. Good luck.
Ben
Check out this thread with lots of engineers list (call the number ABOVE the names, not below)
http://www.outerlimits4x4.com/viewtopic ... t=engineer
I spoke to an engineer last week about engineering my hilux (in Vic) and he said 6 inches total lift is the limit. That includes suspension, tyres, bodylift. Last time I checked an SPOA alone is approximately 6" of lift on it's own. Good luck.
Ben
Who is online
Users browsing this forum: No registered users and 0 guests