Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Sourcing cheap control cable

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 56
Joined: Wed Nov 09, 2005 11:55 pm

Sourcing cheap control cable

Post by jungle_surfer »

Hi!

I'm working on a custom project, and I need custom length control cables (like handbrake cables) with sheaths. I asked at a marine supplies place, and they can supply a 4m length of 2mm dia stainless steel for $92. I was hoping to find something a lot cheaper than that. Any suggestions on where I should get them from? It doesn't have to be high-precision, low friction, good quality stuff, just backyard mechanic grade.

(I'm in Sydney)
Top
Posts: 734
Joined: Sun Mar 06, 2005 5:25 pm
Location: Sunshine Coast Queensland

Post by midi73 »

Repco mechanical can make them up for you or any major brake place should be able to.
Top
Posts: 309
Joined: Wed Nov 08, 2006 7:11 am
Location: newcastle

Post by hammey »

you said they can supply a 4m length, how long do you actually need it?

we have control cables in the work shop (gov.) hanging up. I might be aable to get one for you.
innovation is better, better is faster, and fast is all that counts
Top
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

Try some pushy brake cables.

Tioga used to make an oversize cable for the brakes, Not sure on lenght though
Top
Posts: 56
Joined: Wed Nov 09, 2005 11:55 pm

Post by jungle_surfer »

Thanks for the replies!

I need two pieces of about 4m, and about 3m of sheath.

Can the sheath stuff be bought separately, or is there some other readily available, flexible but non-crushable stuff I could use?
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests