Outer Limits 4x4 Board

http://www.suzisport.com/shop/index.htm ... front.html

What do you think of the kit from this site, Its 350 bucks, in the sierra section.

When you do a 2 inch body lift, is there any issues with brake lines not being long enough, or the steering column being stuffed up, or the gear stick etc not working properly, or are problems like that only associated with bigger lifts? thanks

http://www.outerlimits4x4.com/viewtopic.php?t=48714


Kit looks fine. I'm sure they will chime in, but a few members here make reversible bodylifts that are good gear.

Layto....

Brake lines are unaffected. At 2" the shifter holes may require enlarging a little to get low range and 2nd, 4th, reverse.

Steering column is OK, no need to lengthen it.

There are a few members on here who make reversible 2" lifts.

Steve.

http://www.outerlimits4x4.com/viewtopic.php?t=112266

$200 including postage, I have stock so you could have it on your doorstep by the end of the week.

^^ that sounds good, but that link i just clicked didnt work, I have been away for a few days that why i took a while. If i get a body lift will depend on what size tyres i decide to get, thanks though, please give a link that works, or some details so i can contact you if i decide to get one? thanks

http://www.outerlimits4x4.com/viewtopic ... 18#1129618

And for those you want a Vitara kit watch the For Sale section in a couple of weeks

just cruizin' wrote:http://www.outerlimits4x4.com/viewtopic ... 18#1129618

And for those you want a Vitara kit watch the For Sale section in a couple of weeks

Hi guys, Just Cruisin cruised by my Vitara to work out how the final details for his Vit Kit. He brought along a Sierra kit and they look Awesome. Forget the rest I say and buy his.

The Vitara ones will also rock.

just cruizin' wrote:http://www.outerlimits4x4.com/viewtopic ... 18#1129618

And for those you want a Vitara kit watch the For Sale section in a couple of weeks

Can they be cut down for 1" or similar?

Spock

On either kit 1" is hard because it's an in between length. It can be done but as I would sell bugger all of them the cost would be a bit more. Which vehicle are we talking Sierra or Vitara.

Sierra,

already got two inches of springs and body lift for the purpose of ensuring tyre clearance would be less pain than guard cutting (doing that on a LWB already)....

more of a question of if the design suited literal cutting down, particularly the hollow bolts (tap depth)

The female bolts are the issue in the hole depth, the Vitara kits would be close but I will have to check.