Outer Limits 4x4 Board

OOPS - took all the rubber hoses off the throttle body as part of the engine rebuild, thinking that the manual would have easy to read
schematics....

Wrong - there are schematics allright, but dont have the correct number
of lines etc.... ( and are #$%^ hard to follow )

Can someone please look at their F300 HD-E Feroza and tell me where
the rubber lines connected to the throttle body actually go, and where on
the throttle body they are connected ?

The 6mm lines go to the flux capacitor. Make sure the 8mm line is hooked up through the magnet in the right direction or else you will loose 10% of your power.

The 4" hose hooks up to the leaf blower.


Sorry couldn't resist

Steve.

I have a flux capacitor ??? why wasn't i told ???

I was looking for the uranium q34 explosive space modulator - this makes
me very angry.

Which lines are you after? The two vacuum advance lines and the same size ones running to the MAP and idle solenoid I presume?

Page EC-14 of the Service Manual is very easy to follow.

perhaps I have a different throttle body - mine has five lines whereas
the manual only pictures 4

I think I used that diagram to refit mine a while back.... So you haven't sorted it?