Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ engine mount Q

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 17
Joined: Fri Jun 16, 2006 1:45 pm
Location: Toormy

GQ engine mount Q

Post by Smartdigger »

Hi,
I did a search on here and on A4WDM and couldn't find much

After recently breaking an engine mount (passenger side) on my GQ out in the bush, which in turn split a radiator hose and also but a small hole in the radiator (whole engine jumped forward), i thought i would try and prevent it from happening again.

So i decided to put a bolt through the whole mount (High tensile 3/8 bolt with a nyloc nut). I have left about 5 to 7mm of "play" and also put some rubber washes on to give a bit more "play."

I'm just wondering if 5 to 7mm of "play" is enough or do i need a longer bolt?

your ideas appreciated.

Cheers,
Dave
Top
Posts: 191
Joined: Thu Dec 07, 2006 8:56 pm
Location: Sunny Coast

Post by killer_garden_gnome »

sounds ok, weve done the same on a few never had any probs with about that much, only thing is u forget about em and can end up driving round with a done mount and u sit there for 3 weeks wonderin why everytime u punch it u can hear a clunk, certainly better than a hole in ur radiator but
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests