Page 1 of 1
GQ transfer into GU
Posted: Mon Jul 02, 2007 12:09 pm
by mickyd555
will it bolt straight up?
its from a 4.2 EFI
Couldnt find anything in search but im sure it would be there somewhere.
Re: GQ transfer into GU
Posted: Mon Jul 02, 2007 2:06 pm
by bogged
Im fairly sure they are a straight fit up, as I have seen ads on here and elsewhere for people swapping Tfer cases with rockhoppers for GQ/GU...
Posted: Mon Jul 02, 2007 5:48 pm
by bowtie landie
As far as I am aware the only difference - mainly in the later GUs - is the selector. I haven't tried to interchange the selectors but we have fit a series 1 or 2 GU Transfercase onto a GQ and visa versa.
Peter K.
Posted: Mon Jul 02, 2007 7:17 pm
by mickyd555
bowtie landie wrote:As far as I am aware the only difference - mainly in the later GUs - is the selector. I haven't tried to interchange the selectors but we have fit a series 1 or 2 GU Transfercase onto a GQ and visa versa.
Peter K.
Thanks Peter
Its for my 00 ute so it should be ok from the sounds of it
Posted: Tue Jul 03, 2007 12:46 pm
by mickyd555
Does anyone know how i can check what gearset is in a transfer case when the car is undrivable??
Will i be able to turn it by hand and count?
Posted: Tue Jul 03, 2007 1:21 pm
by nastytroll
put in low turn input shaft count the turns on out put shaft, std is 2.02 to 1, 85% is 3.74 to 1 check marks adapters if other ratio is required