Page 1 of 1
Transfer Case Mounted Disc Parking Brake
Posted: Mon Jul 02, 2007 9:17 pm
by Twistinchassie
any one intrested in one of these let me know as i may be getting a few sent over from a mate in the states for around 360-400 ea,
bolt up jobs same as or similar to the superior eng units that retail for $595 will suit 4cyl 85 to 95ish
Posted: Mon Jul 02, 2007 9:18 pm
by Twistinchassie
not sure if i should of put this in the classified section sorry if i was...
Posted: Tue Jul 03, 2007 10:33 am
by bj on roids
pics?
Re: Transfer Case Mounted Disc Parking Brake
Posted: Tue Jul 03, 2007 8:16 pm
by Pipes
Twistinchassie wrote:any one intrested in one of these let me know as i may be getting a few sent over from a mate in the states for around 360-400 ea,
bolt up jobs same as or similar to the superior eng units that retail for $595 will suit 4cyl 85 to 95ish
DOH just bought one from superior.
Re: Transfer Case Mounted Disc Parking Brake
Posted: Tue Jul 03, 2007 9:54 pm
by A1
Pipes wrote:Twistinchassie wrote:any one intrested in one of these let me know as i may be getting a few sent over from a mate in the states for around 360-400 ea,
bolt up jobs same as or similar to the superior eng units that retail for $595 will suit 4cyl 85 to 95ish
DOH just bought one from superior.
yours would be a custom wouldn't it Pipes ??? to suit your rig
Posted: Thu Jul 05, 2007 8:10 pm
by Twistinchassie
Shot at 2007-07-05
This parking brake kit hooks up directly to the stock parking brake cable. This kit provides dramatically increased braking over the stock parking brake. Will hold truck on a 45 degree hill (tranny in neutral). Kit bolts onto the back of the transfer case. No drive shaft modifications needed. Fits 84-95 gear drive 4cyl transfer case equipped pickups and 4Runners. V6 application not available at this time. Can be used with drum or disc brakes. Black painted finish. Caliper available separately for the those interested in building their own setup. Re-drilling rotor required for use on 79-83 trucks with original driveshafts due to smaller 8mm bolt hole size.
***If vehicle is equipped with Electronic Speedometer pickup, an adapter will need to be purchased. ,
sorry about the late reply
Posted: Thu Jul 05, 2007 8:17 pm
by plowy
nice would be even better if there was one for the cruisers
Re: Transfer Case Mounted Disc Parking Brake
Posted: Thu Jul 05, 2007 10:09 pm
by Pipes
A1 wrote:Pipes wrote:Twistinchassie wrote:any one intrested in one of these let me know as i may be getting a few sent over from a mate in the states for around 360-400 ea,
bolt up jobs same as or similar to the superior eng units that retail for $595 will suit 4cyl 85 to 95ish
DOH just bought one from superior.
yours would be a custom wouldn't it Pipes ??? to suit your rig
although I love pissing my money on custom stuff, the superior will bolt straight on. I think. Sam will find out soon.
Posted: Fri Jul 06, 2007 7:55 am
by bj on roids
plowy wrote:nice would be even better if there was one for the cruisers
ive got one
its for sale too
Posted: Fri Jul 06, 2007 11:07 am
by aussie_stu
bj -> you got a disc brake handbrake for a 40 series? how much and why you sellin?
Posted: Fri Jul 06, 2007 2:00 pm
by bj on roids
aussie_stu wrote:bj -> you got a disc brake handbrake for a 40 series? how much and why you sellin?
sellin cause i never fitted it want $350
plus i runnin the wrong transfer to use it now
caliper, cable, rotor, bolts, brackets, etc, all new...