Page 1 of 1
locker help
Posted: Wed Jul 04, 2007 4:47 pm
by bigmick
just wondering if a wt auto locker will fit into a lj50 centre. not the third member im just talking about taking plenetry gears out of lj and putting locker in.?
any help much appreciated.
thanx
mick
Posted: Wed Jul 04, 2007 5:38 pm
by bigmick
yes/no some one must of tried it.
Posted: Wed Jul 04, 2007 5:55 pm
by Gwagensteve
No is my guess.
Lj50 diff centres share NO architecture with WT. Front and rear LJ are different to each other too (as in all dimensions not just spline count)
Steve.
Posted: Wed Jul 04, 2007 8:24 pm
by bigmick
i put lj gears off a front centre onto a rear 1L centre once only to find that teh splines are different after it was all bolted up. but the gears did fit. so im guesng the centre is the same size. so would a 1.3 diff nave same centre as a 1L? does a wide track 1.3 have a different centre to a narrow track 1.3?
thanx
mick
Posted: Wed Jul 04, 2007 8:29 pm
by Gwagensteve
1.0 and LJ DO share the same architecture - basically the same centre sizes 1.3 NT and WT are bigger everywhere. There are no interchangeable parts.
Steve.
Posted: Wed Jul 04, 2007 8:43 pm
by bigmick
oh ok i get ya now
thanx
mick