Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Leaking H55F gearbox through shifter help!?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Leaking H55F gearbox through shifter help!?

Post by hulsty »

G'day all i'm after some help regarding a oil leak in my H55F gearbox in my FJ73, the picture shows where it is leaking, up though where the shifter goes into the gearbox. Probably explains the hard shifting of my gearbox since the oil is escaping! Looking in my manual it did not show any oil seals or anything, only a ball loaded with a spring and a collar. How do I stop this leak? and is there some kind of seal somewhere and also the ball on the end of the shifter does that wear ? thinking if I can I will replace it to tighten up the shifter abit

cheers

http://forum.ih8mud.com/attachment.php? ... 1183598923
Posts: 2765
Joined: Wed Jan 14, 2004 10:32 pm
Location: somewhere out there

Post by shorty_f0rty »

ewww.. that looks nastey!

there is a bush that goes on the end of the shifter thats all i can help with.. when i swapped gearsticks over, one stayed in the box and the other came out with the gearstick..

i am told this is what needs replacing when the changes get sloppy.

hope this helps.
Built, not bought!
'84 BJ42 - sold! :(
'79 Coiled and turbo diesel'd FJ55
Posts: 72
Joined: Fri May 21, 2004 3:14 pm
Location: Sydney

Post by treebruiser »

I'd be checking the breather on the box as well to see if it's blocked and causing it to blow oil out there,.....
flog the ring out of it
Posts: 20
Joined: Mon Nov 20, 2006 4:13 pm

Post by BeerCruiser »

The gear stick mount is the breather on the h55f. It does not have a seperate breather. There is only a ball end type seal at the top for the gear lever.
You may have overfull oil in the gearbox due oil transfering from transfer case into gearbox. This is very common in the h55f. Cause is the transfer case/ gearbox seal is shot & then pressure build up in transfer case (when it gets hot) pumps oil into gearbox.
HZJ75 Ute I/C TD
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests