Arb Compressor Wiring Diagram
Posted: Mon Jul 09, 2007 6:07 pm
Yes i have tried search and no luck so if anyone could help out with finding it that would be great
Cheers Dan
Outer Limits 4x4 Board
Aussie Hardcore Wheelers
https://outerlimits4x4.com.au/
Arb Compressor Wiring Diagram
Page 1 of 1
Posted: Mon Jul 09, 2007 6:19 pm
Cheers Dan
Posted: Mon Jul 09, 2007 7:34 pm
Thanks for that 
Posted: Tue Jul 10, 2007 6:34 pm
For those that are wanting to use an ARB Compressor Switch with another brand of compressor, (I.E no wiring loom etc) I found the following when installing mine last weekend.
With terminals on switch facing you, arrows pointing upward, the big gap between the terminals should be at the bottom.
Top Right – Power out.
Top Left – Dash Light in
Middle Pin – Power in
Bottom Left and Right – Earth.
N.B. I bought one of these switches last week to install with my BOSS compressor, earlier versions of this switch may have differences in them. See the Carling website for diagrams.
Looks better and fits just nice in the GQ than just a toggle switch etc.
With terminals on switch facing you, arrows pointing upward, the big gap between the terminals should be at the bottom.
Top Right – Power out.
Top Left – Dash Light in
Middle Pin – Power in
Bottom Left and Right – Earth.
N.B. I bought one of these switches last week to install with my BOSS compressor, earlier versions of this switch may have differences in them. See the Carling website for diagrams.
Looks better and fits just nice in the GQ than just a toggle switch etc.