Page 1 of 1
Wanted LT95/isuzu 3.9 Bellhousing
Posted: Wed Jul 11, 2007 10:57 pm
by westy
Hi All,
I know they're scarcer than rocking horse poo, but I Urgently need a LT95 bell housing to marry upto a 3.9 isuzu, This will be going into my SerIIB 6X6.
Can anybody suggest a seller? (or possibly you may have one for sale yourself).
I need to get it finished for Cooma next Easter.
I can be contacted on 0402 317380
Thanks in advance.
Westy
Posted: Thu Jul 12, 2007 12:16 pm
by Loanrangie
Hi Ken, i have the rocking horse but it just wont sh#t !
Posted: Thu Jul 12, 2007 1:35 pm
by ISUZUROVER
There used to be a place up in QLD that sold them (A LR Parts place - not british offroad though) - think it was in bundaberg.
They used to advertise in the 4x4 trader mag. I was about to pick up a bellhousing and flywheel from them, but ended up getting a complete 3.9 county for the right price.
Posted: Thu Jul 12, 2007 3:40 pm
by andrew e
long shot, but try peter at range parts. 02 98962344.
i bought a damaged one off him 4 years ago.
Andy
Posted: Thu Jul 12, 2007 4:44 pm
by Dave_S
I have one. It's a bit expensive but it does come with a 4BD1/LT95 120 ute
bell housing
Posted: Thu Jul 12, 2007 9:37 pm
by westy
Thanks Guys for your help and the info
I'll try all those places in the next couple of days.
Thanks nick BUT I do not want just the rocking horse by itself..
I have a 5speed Santana box for a 3.9 Isuzu, but I need to use a LT95 so I can fit my 6x6 adapter in the PTO slot
Posted: Fri Jul 13, 2007 11:50 am
by modman
andersons landrover parts, they have some ex army stuff as well. thay allways advertise in those 4wd for sale picture books. they have a constant add that says isuzu bellhousing for sale poa$.
ken, did chris have a bellhousing from the army 110 he wrecked or is that the one that went into swaggi?
david
Posted: Fri Jul 13, 2007 1:28 pm
by cloughy
I wanna know more about the 6x6
Pics????
Posted: Fri Jul 13, 2007 4:35 pm
by modman
the best 6x6 was bill larmans, should be vid off it around somewhere.
it also had bullbar and belly wheels for climbing over 1m diameter logs
he did a magazine shoot years ago and when they suggested a undercarriage shot he gently rolled it onto the side
very cool looking 110 (or one something)
the rear wheels had about 3 foot travel
if i remember correctly
unfortunately we have lost bills tech on this board after a disagreement with other people, now he refuses to look or post here. he can be found lurking on pirate or uk rover sites.
david
Posted: Fri Jul 13, 2007 4:57 pm
by ISUZUROVER
modman wrote:andersons landrover parts, they have some ex army stuff as well. thay allways advertise in those 4wd for sale picture books. they have a constant add that says isuzu bellhousing for sale poa$.
ken, did chris have a bellhousing from the army 110 he wrecked or is that the one that went into swaggi?
david
That was the place I was talking about - in bundaberg or thereabouts aren't they?
Posted: Fri Jul 13, 2007 6:41 pm
by cloughy
modman wrote:the best 6x6 was bill larmans, should be vid off it around somewhere.
it also had bullbar and belly wheels for climbing over 1m diameter logs
he did a magazine shoot years ago and when they suggested a undercarriage shot he gently rolled it onto the side
very cool looking 110 (or one something)
the rear wheels had about 3 foot travel
if i remember correctly
unfortunately we have lost bills tech on this board after a disagreement with other people, now he refuses to look or post here. he can be found lurking on pirate or uk rover sites.
david
Yea yea, Iknow about bill's, but I want to know about westy's
Posted: Mon Jul 23, 2007 11:25 pm
by westy
Hi Guys
I'll start posting pics when it starts to look like a rover again, not just millions of bits all over the garage floor everywhere.
I've finally managed to source a bellhousing to fit my 4bd1T / lt95 into my modified/lengthened chassis.
Now to start re-assembling the whole thing again into a vehicle.
Posted: Tue Jul 24, 2007 12:37 pm
by ISUZUROVER
I am keen to see pics as well. I would love a IIB... and you chose the perfect engine for it.