Outer Limits 4x4 Board

Hi all,
Under the paj on the weekend giving it a check over and noticed that the rear propshaft has some vertical movement at the transfere case end. The uni joints are fine, just seems 'loose' on the spline.
Are they supposed to have some float in them, or should it be nice and solid on the spline?

Cheers
cookie monster

Gday All
Was about to post a similar question when i came across this one. I've a 01 NM GLX and when taking off in 1st or when low revs in a higher gear, i get this grinding/vibration, i've read a little about the carbon fibre prop shafts, but wondering if anyone can help or shead light one this.
Regards to All

Mine has quite a bit of movement. Doesn't leak oil though. Yet.

My local Mitsi dealer wassaying they canbe rebuilt.