Outer Limits 4x4 Board

hey guys, im lookin at mounting my winch behind the cab because the poor luxie dosent need the extra weight up the front, was just wondering if anyone has any pics of wat they've done or hav seen done, would be nice to see wat other people hav done for cradles and if i need to use plasma rope or not???

CHEERS
tyler

One I have seen done in a few places is run it to the rear, round a pulley block, then to the front (routing could be fun).

To rear winch you run out the pulley block.

To forward winch you do a normal direct pull.

Fairleads for the rear, and any intermediate pulleys could be fun. Avoid tight corners.

You have prob seen similar.

Paul

Have a look at this one, he is able to supply cradles and mounting kits for most vehicles.

http://www.3rdrock4x4.com/forum/download.php?id=1177

Ben

When we were up in cairns a few weeks ago i saw a HJ ish 1 tonner with a winch mounted behind the cab... dunno why u would want it on 1 of those but anyway..

sorry for this bit of useless info

i have seen one of these on an ibex (kit car made from a land rover). It had a central mounted winch that goes to the back of the 4wd and around a pulley then to the front. the pulley can be pulled out and used in a rear recovery like a snatch block or like a standard winch out the front. only issue was making sure it wound on the winch evenly as you could not see it directly.

manitou wrote:i have seen one of these on an ibex (kit car made from a land rover). It had a central mounted winch that goes to the back of the 4wd and around a pulley then to the front. the pulley can be pulled out and used in a rear recovery like a snatch block or like a standard winch out the front. only issue was making sure it wound on the winch evenly as you could not see it directly.

How do u wind it on evenly when u can see it?? when u have 2t on the end of the cable it winds onto the drum how ever it wants.