hey all,
my def is suffering from lack of power.
vehicle = 1998 300 tdi tray back. 220,000km, never missed a service. 3 inch mandrel bent exhaust, fuel pump turned up, more efficent intercooler.
stock gearing except maxi drive low range. 235/85r16 mud horns. had a new head installed 5000km ago. 2 inch lifted springs.
trailer i tow every day weighs 1.9 tonne. dual axle
on the high way, 5th gear on level ground gives me a max (foot to floor) of 110km/h. if theres a small head wind that drops back to 105km/h
any slight incline and speed drops, small hills drop me back to 85 - 90.
very frustrating.
this has not happened over night. it seems to be a lack of torque???
so what should i be looking for?????
cheers serg
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
my defender = lack of power???
Moderator: Micka
After the head was fitted, have you re adjusted the tappets again after about 1000km?
.008" (.208mm) inlet and exhaust, cold or hot. This should be checked at every service also.(10,000km intervals)
A lack of go is usually the first symptom of out of adjustment valve clearances in a Tdi.
JC
.008" (.208mm) inlet and exhaust, cold or hot. This should be checked at every service also.(10,000km intervals)
A lack of go is usually the first symptom of out of adjustment valve clearances in a Tdi.
JC
'92 Rangie Sherwood/turbo intercooled isuzu4BD1 /ACE/ full leather/2.5" exh/2.5" body lift/DeCarbon shocks/LR tanks/LT95 back in and OK now, Sals conversion soon...
Who is online
Users browsing this forum: No registered users and 2 guests