Page 1 of 1
88 - 89 model GQ leaf Sprung Body on 89 LWB chassis
Posted: Tue Jul 24, 2007 2:20 pm
by CWBYUP
Can anyone tell me if this is possible ?
Do the body mounts line up ?
No one can give me a 100% answer. And yes I searched.
Any help would be greatly appreciated.
CHeers Nick
Posted: Tue Jul 24, 2007 7:45 pm
by badger
yes
Posted: Tue Jul 24, 2007 7:53 pm
by GOT MUD
i call no or not without mods cause the ute chassis is wider to the point that a mate changed his leaf ute to full coil instead of putting his cab on a coil chassis
Posted: Tue Jul 24, 2007 8:26 pm
by outback_pootrol
it will go straight on but you will need to modify the inner gaurds to suit the coil spring mount as it will hit the side inner gaurd
Posted: Tue Jul 24, 2007 8:34 pm
by CWBYUP
Well 2 to 1 saying yes is looking good so far
Nick
Posted: Tue Jul 24, 2007 8:53 pm
by BIG GQ
outback_pootrol wrote:it will go straight on but you will need to modify the inner gaurds to suit the coil spring mount as it will hit the side inner gaurd
This is correct. basically just need to whole saw one spot in the inner guards.
Posted: Tue Jul 24, 2007 11:11 pm
by GOT MUD
wow oh well i was wrong
or at least my mate was and went the long way about it i was going on what he told me about it may he shouldve asked the Q on here before doing it
wait till i tell him
