Outer Limits 4x4 Board

Posted: **Tue Jul 24, 2007 6:21 pm**

anyone know where i can get the tool that puts a step in the edge of a panel so you can lap weld it?

Posted: **Tue Jul 24, 2007 6:49 pm**

supercrap have an air one but is only good for up to 0.8mm with a 17cfm compressor, over that it distorts the metal.

Posted: **Tue Jul 24, 2007 6:56 pm**

thanks mate

Posted: **Tue Jul 24, 2007 7:00 pm**

any tool shop, or ebay.
its called a flange tool

panel rebater