Page 1 of 1
Bullbar question for Triton
Posted: Wed Jul 25, 2007 5:34 pm
by Vineboy
Why can't a 02 bullbar fit a 98 model. The Tritons are both MK's so I thought it should not be a problem.
Posted: Wed Jul 25, 2007 6:57 pm
by CORTY
Grill centre section sits lower on 02.
Posted: Wed Jul 25, 2007 7:07 pm
by Vineboy
CORTY wrote:Grill centre section sits lower on 02.
So does that mean there would be a bit of a gap at the back of the bar? Do you know if the brakets would line up?
Posted: Wed Jul 25, 2007 7:40 pm
by CORTY
Prob will be a gap dont know about the mounts cant attach photo to show u
Posted: Fri Aug 03, 2007 6:54 am
by Vineboy
Just for interest. Picked up a ARB winch bar from a 2001 onwards (mines a 1998). All holes line up fine but there is a bit (50mm) gap in front of the grill. Also it seems a bit wider as well but I have flexy flares so the bar joins in nicely with these.
One thing I did REALLY notice was the extra weight hanging out front from the standard plastic bumper bar. It's given me more oversteer and harder to turn, even with a couple of extra psi in the tyres. The arse end seems to skip around a bit more (could be my imagination though)