need help finding flares
Posted: Wed Jul 25, 2007 7:57 pm
does anyone known of ay place in QLD where i can get my hands on some bushwhacker flares for my suzi
Outer Limits 4x4 Board
Aussie Hardcore Wheelers
https://outerlimits4x4.com.au/
need help finding flares
Page 1 of 1
Posted: Wed Jul 25, 2007 9:21 pm
Not sure of anywhere in QLD but BBM should be able to do something for you, bulky items to freight though. Could try OnTrack on Moss St Slacks Creek
Posted: Thu Jul 26, 2007 1:45 am
I got mine from Peter @ Offroad Performance Warehouse, they are the direct importers of Bushwacker flares & should have the 6" in stock if that's what you're after: http://www.opw.com.au/
Posted: Fri Jul 27, 2007 5:28 pm
I am currently making a set of extended flares out of fibre glass.
when mounted they will sit 115mm out from the guard
40mm wider than original w/t flares.
pm for price$
when mounted they will sit 115mm out from the guard
40mm wider than original w/t flares.
pm for price$
Posted: Fri Jul 27, 2007 5:32 pm
make a mould and make them from something with some flex.
Posted: Sun Jul 29, 2007 5:47 pm
If I get enough people interested in my design I might look at getting them made out of the same plastic they use for new 4x4 bumper bars,
But to do this will take a bit of cash, mainly to build the vacume form moulds then the plastic. but if i had a run of 20 sets I recon it would come down in price!
need feedback to get it off the ground.
if you want more pics just ask
But to do this will take a bit of cash, mainly to build the vacume form moulds then the plastic. but if i had a run of 20 sets I recon it would come down in price!
need feedback to get it off the ground.
if you want more pics just ask
Posted: Sun Jul 29, 2007 6:11 pm
Bunnings Plastic Garden Edging 