Outer Limits 4x4 Board

I have some 50mm round aluminium bar, is this big enough for a lux body lift?

yep
if ur going 2 inch high

Yeah only 2 inch.

i have had two hiluxes now that i have ended up putting bodylifts into.the first was 50mm alloy,2nd was 50mm steel.i think the diameter is good enough,just keep an eye on things if you are worried.i also reccomend not going more than 50mm b/lift which im sure u werent anyway....matt

will 50 mm round bar fit in where the old rubbers are and why go more then 50 mm heigh

Yeah 50mm will fit in Easy don't go more than 3in in height because of the force (leverage) that will be put on the bolts thats what people have been saying.

Try and use a bit bigger under the cab like 65-75mm diameter to spread the load a bit more on the sheet metal. will stop some cracks. p.s can only fit 50mm on the very front radiator support mounts.

cheers....