HZJ75 Hi-Lift Chassis mounting brackets.
Posted: Thu Jul 26, 2007 12:41 pm
I made these yesterday to mount my Hi-Lift out of the way. They are made from 50 x 5mm flat and use the original M10 chassis weld nuts to mount the brackets. The base plates are 75mm long and the jack mounting bolts are M12. I thought the idea may be of help to someone. The only potential problem is that the jack would be difficult to access if you got hung up on the tray departing a gully, but it is not a big deal for me.
Shot with FinePix S7000 at 2007-07-25
Shot with FinePix S7000 at 2007-07-25
Shot with FinePix S7000 at 2007-07-25
Shot with FinePix S7000 at 2007-07-25
Shot with FinePix S7000 at 2007-07-25
Shot with FinePix S7000 at 2007-07-25
Shot with FinePix S7000 at 2007-07-25
Shot with FinePix S7000 at 2007-07-25
Shot with FinePix S7000 at 2007-07-25
Shot with FinePix S7000 at 2007-07-25