Outer Limits 4x4 Board

Posted: **Sat Jul 28, 2007 12:45 pm**

Does anyone have any hints on the best way to fit extractors to a 4Runner with EFI 5.0L.

The standard manifolds will foul the steering column.

Customs will be very expensive.

If I am going to cut and shut some standards any idea of which brand and type would be most suitable.

Do the SS block huggers I have heard of exist.

Cheers

Posted: **Sun Jul 29, 2007 8:53 am**

http://www.castleauto.com.au/

Posted: **Sun Jul 29, 2007 11:33 am**

Thanks, locked them into favourites.

Cheers

Posted: **Mon Jul 30, 2007 7:55 pm**

have you tried a set pacemakers.. i had a set on my old calais andvl

Posted: **Mon Jul 30, 2007 8:56 pm**

nate_lux wrote:have you tried a set pacemakers.. i had a set on my old calais andvl

No haven't tried any yet, just assuming that if standard manifolds foul the steering column, then standard extractors probably will too.

cheers

Outer Limits 4x4 Board

V8 extractors

V8 extractors