Page 1 of 1
Crown Wheel and Pinion out of GQ leaf into coil housing????
Posted: Mon Jul 30, 2007 9:58 pm
by shankdogg
Hi, i want to use the crownwheel and pinion out of a GQ leaf ute diff and put into a coil diff. I know the housings are bigger but are the crown wheel and pinion compatible? i am trying this conversion as the ute diffs are 4.3 and i can get hold of a front centre cheap. Any help would be appreciated, thanks
Posted: Tue Jul 31, 2007 7:36 am
by badger
if you are talking rear diff there is no way it will fit i have both centres out the back and the h260 (leaf ute) the crown wheel wont even fit thru the hole in the h233 (normal gq) pumpkin
fronts swap straight over tho
Posted: Tue Jul 31, 2007 1:04 pm
by bj on roids
plus the axles are like 1.33" vs 1.7"
Posted: Tue Jul 31, 2007 3:35 pm
by badger
ahhh bj speaking of h233's i had forgotten to pm you back to come look at that diff
Posted: Tue Jul 31, 2007 3:39 pm
by badger
ahhh bj speaking of h233's i had forgotten to pm you back to come look at that diff