Page 1 of 1
DTS Turbo manifold with T3-T25 Adapter
Posted: Tue Jul 31, 2007 2:42 pm
by oondy
I read somewhere that if you fit a DTS Turbo manifold, which has a T3 outlet, with a T3-T25 Adapter, onto a TD42 in a GQ/GU that the Turbo housing hits on the chassis rail.
Can anyone confirm this?
I can get a good (well I think its good) price for a DTS Manifold from MTQ.
cheers
OONDY
Posted: Tue Jul 31, 2007 9:48 pm
by sudso
As you know mate mine is a DTS (MTQ) turbo and it doesnt touch the chassis anywhere.
Posted: Wed Aug 01, 2007 8:44 am
by oondy
I should have been a bit clearer, if I fit a DTS Manifold with a T3-T25 adapter then fit a GT28RS on there, i've heard that it can touch the chassis.
This is only hearsay ofcourse.
cheers
OONDY
Posted: Thu Aug 02, 2007 1:52 am
by sudso
Sorry, cant help ya there fella.
Posted: Fri Aug 03, 2007 11:10 pm
by PGS 4WD
If you make an adapter that is too long you will have problems with the chassis rail, I've fitted 1/2 a dozen by retapping the manifold. MTQ have a T3 T25-28 adaptet in the pipeline, talk to Wayne Flarety at Adelaide branch.
Joel