Outer Limits 4x4 Board

Posted: **Mon Dec 29, 2003 11:11 am**

anyone in melbourne know who sells hub nut spanners to suit rangies....called heaps of places and they reckon I'm nuts...
might have to find a socket...what is 2 1/16 " in mm...

Posted: **Mon Dec 29, 2003 11:16 am**

1 1/16" should be 27mm IIRC repco should have one for around $5

Posted: **Mon Dec 29, 2003 11:42 am**

2 1/16"
2"=50.8mm
1/16=1.5875mm??
total= 52.3875mm.
i thought 4wd in blackburn rd. sell them. could be wrong??
remove with a chisel and take to a tool shop to size a socket. i have seen one and it looks like a tubesocket if i'mcorrect.
rough rough cheap cheap (bird dog mechanics) :roll:

modman

Posted: **Mon Dec 29, 2003 11:58 am**

looks like 4wd spares is closed for the holidays...so you reckon a 53mm will fit

Posted: **Mon Dec 29, 2003 12:05 pm**

sorry must have dreaming about not being at work I thought you meant wheel nut for some reason :(

but yes 53mm should do it

Posted: **Mon Dec 29, 2003 1:00 pm**

just make sure you canswap the socket and it does fit over axle and other stuff with the rachet on.

modman

Posted: **Mon Dec 29, 2003 5:41 pm**

52mm is the size you require.

I have one that is 1/2 inch drive that I cut and lengthend so it fits with the 110cv's I have fitted to later narrow hubs with M/D axle sets.

Posted: **Mon Dec 29, 2003 9:23 pm**

bootie fab is catching via the web :twisted:

modman

Posted: **Tue Dec 30, 2003 1:42 pm**

All 4x4 spares have the correct tube spanners they are in Newcastle, they were $5 last i saw
02 49571117

Posted: **Tue Dec 30, 2003 3:56 pm**

thanks

Posted: **Wed Dec 31, 2003 12:40 pm**

4 Wheels Drives in Middleborough Road Blackburn has them for $7 or you can borrow mine if you like.

Cheers

Daryl

Posted: **Wed Dec 31, 2003 12:57 pm**

thanks daryl... i have striped th axles back as far as I can without undoing the nuts and will go there when they open again