Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
3B fast idle
Moderators: toaddog, Elmo, DUDELUX
3B fast idle
I have a BJ73 with 3B motor and after market turbo. In the last 3-4 weeks the idle speed has jumped. The car used to idle around 600rpm, and now idles at around 1300rpm.
The idle speed only picks up once the engine is warm. The engine itself has no noticable difference in power/performance etc it is just idling really fast once warm.
As this is my first diesel I don't really know where I should start looking or if there are any obvious things to look out for
Any help would be much appreciated
Cheers
Craig
The idle speed only picks up once the engine is warm. The engine itself has no noticable difference in power/performance etc it is just idling really fast once warm.
As this is my first diesel I don't really know where I should start looking or if there are any obvious things to look out for
Any help would be much appreciated
Cheers
Craig
1stly.. search here: http://forum.ih8mud.com/forumdisplay.php?f=24
2ndly.. It could be a hole in your governor diaphram.. a thing on your injector pump, .. if you have holes in it you might get a faster idle (i think this is what i read).. its a $40 part and a PITA to replace but possible at home..
i'd double check on ih8mud first though..
2ndly.. It could be a hole in your governor diaphram.. a thing on your injector pump, .. if you have holes in it you might get a faster idle (i think this is what i read).. its a $40 part and a PITA to replace but possible at home..
i'd double check on ih8mud first though..
12H-T pump is directly controlled, it has no diaphragm, so your fast idle is probably more of an adjustment issue.ellard wrote:Hi there
Would this also be applicable for the 12ht fast idle issues - and also a pig to drive in low-range 4x4 (running to fast).
If this is the case has anyone have any pictures or description what has to be done to repair the problem.
Thanks
Wayne
the idle speed screw is just the throttle stop, pretty easy to figure out and adjust.
Free air locker to the first 20 callers!
Who is online
Users browsing this forum: No registered users and 81 guests