shaved gq diffs.
Posted: Sun Aug 05, 2007 1:15 pm
just wondering if any one has got any picks of there shaved gq diffs and how much clearence they made.
any help appreciated.
thanx
mick
any help appreciated.
thanx
mick
Page 1 of 1
Posted: Sun Aug 05, 2007 4:13 pm
theres a lot easier ways to get 10mm clearance
Posted: Sun Aug 05, 2007 4:17 pm
appart from going up 2 inches in tyre size how.
Posted: Sun Aug 05, 2007 5:50 pm
zook diffs 
i looked into it, didnt think there was much room to shave off of patrol diffs without getting realy close to the crown wheel and risking breakage if you were to hit things
i looked into it, didnt think there was much room to shave off of patrol diffs without getting realy close to the crown wheel and risking breakage if you were to hit things
Posted: Sun Aug 05, 2007 6:26 pm
From memory you can take off 14mm from the front diff before getting too close to the crown-wheel. But then plating the hole with 6mm leaves you with 8mm overall gain. You can achieve 18mm safely I think by getting into the crown-wheel.