rear suspension leveler thingy
Posted: Sun Aug 05, 2007 7:32 pm
Just want to know, is there any tricks in removing it.
No.
May need to use hammer and chisel to undo the nut at the bottom ball joint.
Outer Limits 4x4 Board
Aussie Hardcore Wheelers
https://outerlimits4x4.com.au/
rear suspension leveler thingy
Page 1 of 1
Posted: Sun Aug 05, 2007 7:56 pm
Posted: Mon Aug 06, 2007 7:33 am
maybe a grinder tooBush65 wrote:No.
May need to use hammer and chisel to undo the nut at the bottom ball joint.
Posted: Mon Aug 06, 2007 2:21 pm
took the one off my 110 a few weeks ago, pretty easy to do, i just droped the shock mounts off the top and unbolted the top leveler mounts, then raised the chassis till the leveler was fully extended, i used a set of stilsens on the bottom bolt as i couldnt get enough grip on it with a shifter, it came undone easy with the stilsens and some pipe on the handle for leverage.
Posted: Mon Aug 06, 2007 4:10 pm
we tried this, tried heat, tried penetrene, rattle gun... the only thing it didnt argue with was a grinderqserv wrote:took the one off my 110 a few weeks ago, pretty easy to do, i just droped the shock mounts off the top and unbolted the top leveler mounts, then raised the chassis till the leveler was fully extended, i used a set of stilsens on the bottom bolt as i couldnt get enough grip on it with a shifter, it came undone easy with the stilsens and some pipe on the handle for leverage.
