Outer Limits 4x4 Board

Gen three LS1 into a nissan patrol , i cant use the standard extractors so looks like i need them custom done i have the motor sitting in there any ideas?

mate I made my own out of 316 s/steel. the flanges were $80 pr for 10mm mild steel laser cut. i ran the drivers forward and under the motor across the front and down with the other one. I sat my motor low to reduce COG

I have heard some us headers fit,

cheers bru

I have an engine to fit to my gq as well. hoping to do it in the chrissy hols. i heard CRS do some that might fit.

Something in here 'might' help..

http://www.castleauto.com.au/hs_dbase/f ... xsc2VhcmNo

LS2 6.0 L standard cast exhaust manifolds will fit.