Outer Limits 4x4 Board

Hi guys, getting new rims & tyres soon, the rims are 15 x 8 with 33 x 12.5 muddies on them, my truck has a 2inch lift on it, will they scub ?cheers

as much a little in the inner of your rear fender at full flex .. don't worry.



OME 2.5" + SR kit ..

as much a little in the inner of your rear fender at full flex .. don't worry.

and maybe just rub on the bottom of the front flare when the wheels are turned at full articulation. mine does

Tapage wrote:as much a little in the inner of your rear fender at full flex .. don't worry.



OME 2.5" + SR kit ..

x2
99% of the time no problems 1% of the time a little rubbing rear inner guard. [img]

You might find they scrub on the front guards as well, at the top under full compression, and on the bolt head at the bottom front inner guard. I needed a body lift to stop them cracking the join at the top of the inner and outer guards as the tyres weree always hitting fully compressed. With a 2" body lift and a 2" spring you can run 35" pedes no worries.

They should clear fine on standard. I has 33x12s on 15x8 on missan offset and i never had a issue. With a 2" lift, your going to be fine

also sometimes on the front, fully compressed turning the wheels.hits on some bolt heads
but as i said hasnt been an issue.........yet

i have found the offset of the rims make all the difference,i run 35's on my 60 and have no problems,even when i play rough.just lucky i guess.

my mates got 33 x 12.5's on the his stock 60 series, if anything the springs have sagged an inch, and it doesnt scrub at all.