Outer Limits 4x4 Board

hi i bought a surf chassy and over 5 days carefully removed the complete coil setup from the surf, removed my leaf setup, and fabricated it in place... (ill do a writeup later got heaps of pics)

Now i have the coil crossmembers in with diff centre and housing, but need to setup the brakes.... (fuel tank is last)

I have used the factory axles but might have some issues with the way the hand brake setup is..

Does any one know how someone has set this up on a lux before or if anyplace around sydney that can set it up (thats not 2 expensive)...Cheers

i did this conversion i just changed over the backing plates to keep the old cable worked fine